Interior elevations Select a wall, floor, or ceiling. Change its material or add windows, doors and more. Drag items to move them. Resize items with the green handle at the top right corner.
Front wall
Add
Window
Decay
Listen
Absorption at 1 kHz
Surface
Material
Sm²
α
S·α
Total: A = Σ S·α
SABINEReverberation Visualizer
History
In 1895 Harvard's president asked a young physics professor, Wallace Clement Sabine, to fix the lecture hall in the university's new Fogg Art Museum. Speech there was almost impossible to follow: a single spoken word hung in the air for more than five seconds.
Sabine had no microphones and no electronic meters. He had an organ pipe, a stopwatch and his own ears, and he timed how long a note took to fade into silence. Working at night, he and his helpers carried hundreds of seat cushions over from nearby Sanders Theatre, laid them out a few at a time, and timed the decay again after each step.
The measurements fell on a simple curve. Reverberation time grew with the room's volume and shrank with the total absorption of its surfaces. By 1898 he had found his equation for reverberation; he published it in 1900. He also defined a unit of absorption, later named the sabin: the absorption of one square foot of open window, which lets sound out and never sends it back. (The metric sabin is one square metre.)
His first big job was as acoustical consultant for Boston's Symphony Hall, opened in 1900. It is still considered to be among the finest concert halls in the world.
Why?
Why does a bathroom typically reverberate more than a bedroom of the same size?
How much does one rug, one curtain or one acoustic panel really change the sound of a room?
If a room doubles in size, does its reverberation double too?
Which materials absorb low frequencies, and which soak up high ones?
I wanted a tool that answers these questions in a playful, visual and audible way.
Who?
Daniel Fox is a record producer, engineer and educator based in Massachusetts, USA.
Questions, ideas, or bugs? edulab@wondersmithaudio.com
Try the other Wondersmith EduLab apps, or bring a hands-on workshop to your school or team.
The board shows Sabine's equation, k × V ÷ A = RT60, with your room's numbers. RT60, in amber, is how long the sound takes to fall by 60 dB. V is the room's volume, A its total absorption, and k a constant (0.161 in metres, 0.049 in feet). Absorption depends on frequency, so the app works it out at the six standard octave bands from 125 Hz to 4 kHz. Choose one with the buttons on the board, or click a bar under the decay display; every α shown (in the material menus and the Absorption table) is at that frequency.
The room
Size: drag the L, W and H handles on the 3D room, use the sliders, or type a value. Scale all resizes the whole room in proportion; double-click it to return to ×1.00.
3D view: drag to turn the room. Fit room to view re-frames it.
Surfaces: select a wall, the floor or the ceiling, in the 3D view or the elevations, and choose its material or add windows, doors and more. Drag items to move them, drag the green handle to resize them, and press Delete to remove one.
Elevations: the four walls as seen from inside, then the floor plan and the ceiling as architects draw it (reflected, as if seen in a mirror on the floor). The front wall is at the top of both plans.
New room, Open, Save: start again from the example room, load a saved room, or save yours as a file.
The decay
Waveform: the clap and the outline of the reverberation that follows, one colour per frequency, with each RT60 marked. It shows how the level falls, not a recorded waveform. The short gap after the clap is the pre-delay: the time until the first reflection off a wall or the ceiling arrives, for a listener in the middle of the room and a source 3 m in front of them.
Bars: RT60 at each frequency. The dashed line marks the top of the scale, 4 s; in very live rooms it changes to 8, 16 or 32 s.
Listening
Choose Clap, Melody or Custom (your own audio file) and press the button. You hear the room as if standing 3 m from the source. Reverb turns the room sound up or down (0 dB is the true balance). A dry, close-miked recording works best. Air absorption adds the absorption of the air itself, which matters most for high frequencies in big rooms.
Keyboard shortcuts
Space the Listen button, even while you drag a slider
Delete remove the selected item
Things to try
Start with a very lively room: set every surface to glazed tile, as in a bathroom, and clap. Now change just the ceiling to the 10 cm fiberglass panel and clap again. How much does one surface out of six change RT60? Which frequency rings longest now, and why?
Replace a window with an open window and find its α on the Materials tab. Why might Sabine have chosen an open window as his measure of perfect absorption?
Add a fiberglass panel, then drag it to a different wall and watch the numbers. What does that tell you about what Sabine's equation takes into account? Would a real room behave the same way?
Build a concert hall: about 50 m long, 25 m wide and 18 m high, with an audience on the floor. Then make the seats empty. How much does the audience change RT60, and at which frequencies? What might that mean for a rehearsal compared with a concert?
Absorption coefficients
All values are published measurements (brick and glazed tile from secondary tables). Measured values above 1.00 are shown as 1.00. Full references are under Sources.
Absorption coefficients
Values at the six octave bands from 125 Hz to 4 kHz, all as published. Laboratory values above 1.00 (an edge effect of the test method) are shown as 1.00.
All materials, except those listed below: F. Alton Everest and Ken C. Pohlmann, Master Handbook of Acoustics, 7th ed. (McGraw-Hill, 2022), Appendix C, "Selected Absorption Coefficients". AccessEngineering The wood door uses the handbook's values for a 3/8-inch plywood panel, as no measured data for doors was found.
Fiberglass panels: Owens Corning, Fiberglas 700 Series Board product data sheet, Pub. No. 10021736-H (2026), type 703, unfaced, ASTM C423, Type A mounting. owenscorning.com
Acoustic foam: Riverbank Acoustical Laboratories, report RAL-A96-251 for Auralex Acoustics (3-inch Studiofoam wedges), 1996, ASTM C423-90a. Riverbank was founded in 1918 by Wallace Clement Sabine. Report (PDF)
Seating: audience from Leo L. Beranek, Journal of the Acoustical Society of America 120(3), 1399–1410 (2006), Table III PubMed; empty seats from Leo L. Beranek and Takayuki Hidaka, Journal of the Acoustical Society of America 104(6), 3169–3177 (1998), medium-upholstered chairs AcousticSphere / PTB.
Brick and glazed tile or marble: typical values repeated in many published tables, for example sengpielaudio.com. No original measurement was found.
Open window: 1.00 by definition.
Air absorption
ISO 9613-1:1993, calculated at 20 °C and 50 % relative humidity. iso.org The formula as reproduced at sengpielaudio.com.
Methods
The equation: Wallace Clement Sabine, "Reverberation," The American Architect and The Engineering Record (1900); reprinted in Collected Papers on Acoustics (Harvard University Press, 1922).
The listening balance (direct and reverberant sound): H. F. Hopkins and N. R. Stryker, Proceedings of the IRE 36, 315–335 (1948).
The reverb you hear (not the numbers shown) adds the first reflection off each surface, for a listener in the middle of the room and a source 3 m in front of them (the same positions set the pre-delay), and above 4 kHz, where no published data exist, each material's absorption continues its 1–4 kHz trend upwards.
Real products and rooms vary. For a real project, use the manufacturer's test data and measure the room.
RT60
Time for reverberation to fall 60 dB after the initial sound.
Absorption coefficient (α)
How much sound energy (at the given frequency) a surface absorbs, from 0 (a perfect reflector) to 1 (an open window).
sabin
The unit of absorption: one square metre (or foot) of perfect absorber. A surface of area S with coefficient α contributes S × α sabins.
Total absorption (A)
The sum of S × α over every surface in the room.
Interior elevation
A drawing of a wall seen straight on from inside the room.
Reflected ceiling plan
The ceiling drawn as if reflected in a mirror on the floor, so it lines up with the floor plan.
Air absorption
Sound loses energy to the air as it travels, far more at high frequencies. Sabine's equation does not take this into account, but the option to include it is provided and affects the absorption numbers as well as the sound of the reverb.
Room modes
Resonances of the room itself: standing waves between surfaces at particular low frequencies. In small rooms the modes are few and far apart, and they often dominate the low end. Sabine's equation assumes sound is spread evenly through the room, so the app doesn't show them.